• Product (0)
• News (41)

Current label: PTFE board

• Characteristics of polytetrafluoroethylene board

  2024-05-24 00:00:00
  Features of polytetrafluoroethylene board: 1. The polytetrafluoroethylene board material has good chemical resistance, corrosion resistance, airtightness, high smoothness, non stickiness, and good electrical insulation resistance. 2. Heat resistant, application operating temperature up to 250 ℃. It has good mechanical equipment ductility at ultra-low temperature, and can maintain 5% elongation even when the temperature drops to - 196 ℃. 3. Yes
  Learn more+

• Which fields are applicable to polytetrafluoroethylene board materials

  2023-12-30 10:30:34
  Features of polytetrafluoroethylene board: 1. The polytetrafluoroethylene board material has good chemical resistance, corrosion resistance, airtightness, high smoothness, non stickiness, and good electrical insulation resistance. 2. Heat resistant, application operating temperature up to 250 ℃. It has good mechanical equipment ductility at ultra-low temperature, and can maintain 5% elongation even when the temperature drops to - 196 ℃. 3. Yes
  Learn more+

• What are the advantages of PTFE board?

  2023-12-07 14:30:00
  The F-C bond molecular formula of polytetrafluoroethylene makes it more reliable than other chemicals, and its friction coefficient can reach 0.04, which is also a commodity with very small friction coefficient among all chemicals. In the planning and design of stair building, the design staff thought of how to use suitable raw materials for sliding bearings for stairs, and then chose PTFE for stairs
  Learn more+

• PTFE board has compressive strength against working voltage

  2023-11-19 00:00:00
  Polytetrafluoroethylene plate can make acrylic complete hydrophilicity individually, and its characteristics are generally carried out by trial. Through the whole process of trial, there is no doubt that the precondition for improving low-temperature plasma pre setback is to understand the origin of the improvement of PTFE film hydrophilicity. The high pressure polyethylene floating body is manufactured by professional rotational molding process. It is fully enclosed, corrosion resistant, aging resistant and impact resistant
  Learn more+

• There are various construction methods of PTFE board in the specific construction process

  2023-11-12 00:00:00
  There are various construction methods and many construction regulations in the specific construction process of PTFE board. In the construction step of tetrafluoro plate, construction is not allowed when the working temperature is less than 5 ℃; If the wind above level 5 is strong, the construction cannot be carried out. The protective layer shall be prepared immediately after construction, and different measures shall be taken to avoid exposure
  Learn more+

• PTFE board has no side effects

  2023-10-18 00:00:00
  1. The polytetrafluoroethylene board has no side effects on the body, but PFOA, one of the raw materials used in production, is considered to be very likely to have carcinogenic effects. The ambient temperature is - 20~250 ℃ (- 4~+482 ° F), which allows rapid cooling and sudden heating, or hot cold replacement operation process. Pressure - 0.1~6.4 Mpa (full negative
  Learn more+